-
29
2026-06
How to Maintain a Waterjet Cutting Head for Longer Service Life
In any waterjet cutting system, the cutting head is the component that works under the most extreme conditions. It continuously handles ultra-high-pressure water and, in many cases, abrasive particles that enable cutting through metal, stone, glass, and composite materials. Because of this demanding working environment, even small maintenance oversights can quickly lead to performance loss, reduced precision, or premature failure.
> -
25
2026-06
How to Choose the Right Waterjet Cutting Head for Your Machine
Choosing the right waterjet cutting head is one of the most important decisions in setting up or upgrading a waterjet system. While pumps and CNC controls often get most of the attention, the cutting head is where high-pressure water is actually converted into cutting power. If the head is not properly matched to your machine and application, you may face unstable cutting performance, higher consumable costs, and reduced precision over time.
> -
22
2026-06
Precision Waterjet Cutting in New Energy Manufacturing: A Technical Insight
Battery insulation output up 67%. Fuel cell graphite plates at ±0.02 mm. Solar glass edge strength at 98%. A data-driven look at how abrasive waterjet cutting solves thermal damage, delamination, and scrap in new energy production lines.
> -
10
2026-06
A Comprehensive Guide to Sourcing High-Pressure Waterjet Spare Parts and Maintenance Kits
A technical guide for industrial workshops to secure a reliable supply chain for waterjet pump parts, maintenance kits, high-pressure tubes, and valve fittings.
> -
01
2026-06
87k psi Ultra-High Pressure Pump Breakthrough: 40% Efficiency Boost, Leading the Green Revolution in Industrial Cutting
Yuanhong's new 87k psi ultra-high pressure waterjet pump boosts cutting efficiency by 40% with lower abrasive consumption. Ideal for new energy, aerospace & hazardous industrial cutting.
> -
28
2026-05
How to Extend the Life of Waterjet High‑Pressure Seals: An Engineering Guide
Tired of premature waterjet seal failures? Learn how to optimize water quality, pressure, and installation to maximize your workshop uptime.
> -
28
2026-05
Waterjet vs. Laser Cutting for Carbon Fiber: Precision & Cost Showdown
Choosing between waterjet and laser cutting for carbon fiber? This data-driven analysis compares precision, delamination risks, and TCO to help structural engineers select the ideal 5-axis machining setup for maximum yields.
> -
21
2026-05
Evaluating Large-Scale 5-Axis Waterjet Systems: A Factory Procurement Guide
A technical procurement guide for manufacturing facilities to evaluate large-scale 5-axis waterjet cutting systems based on table travel and structural stability.
> -
23
2026-04
Efficient Cutting of Stacked Materials with Waterjet Technology
In this context, cutting stacked materials with a waterjet offers a practical solution.
> -
15
2026-04
Waterjet Cutting Machine for Glass – Technology, Advantages, and Practical Solutions
By using high-pressure water instead of heat or mechanical force, it provides a safer and more accurate way to process fragile materials like glass.
> -
22
2026-04
A Technical Guide to Selecting Custom Features for Your Industrial Waterjet System
Learn how to configure a waterjet machine for your specific workflow. This guide covers pressure selection, underwater cutting, and the importance of global engineering support.
> -
13
2026-04
40K, 60K, or 87K? Choosing the Right Smart Ultra-High Pressure Waterjet Pump for Your Industry
Compare 40K-87K waterjet pumps for metal & marble cutting. Yuanhong offers custom pressure solutions with smart displays to boost your cutting efficiency.
>
